关闭
点击这里给我发消息
点击这里给我发消息
 +86 0512-62751429
+86 13416743702
Welcome to YUSH Electronic Technology Co.,Ltd.
YUSH Electronic
  English    Chinese
    YUSHUNLI New Design YS-8150N PCB Stencil cleaning machine Metal plastic stencil cleaners
    Detailed Product Description

    Features :
    1.Dedicated to water-based cleaning fluid to clean stencils, PCBA, etc. Process with high pressure spray system.
     2.Double liquid tank, equipped with heating system, implementation needs cleaning and rinsing.
     3.Technological process: cleaning chemical isolation - rinse (open loop/closed loop) - dry
     4.Preparation of advanced automatic touch screen operating software, program files stored, used and its simplicity
     5.Counting system function, can automatically accumulated cleaning sheet number and loop filter
     6.Liquid and the pump pressure can be displayed through the panel pressure gauge, feedback the equipment running status
     7.Window cleaning pressure can be adjusted independently, process is more wide, solve the SMT stencil tension in the process of high pressure cleaning problem
         
    8.Drift lotion resistivity monitoring, ensure the cleanliness, the resistivity can be set up, meet the demand of different halftone technique.
         
    9.Consumables monitor alarm filter service life
    10.Integral stainless steel fuselage, strong and durable, resistant to acid, alkali cleaning fluid, etc  
         
    11. Floating lotion emissions filtering, more environmental protection
         
    12.Effect of high pressure fan + hot air drying, drying more quickly and thoroughly
         
    13. Lower running cost, every time only 12 l liquid cleaning, clean end use compressed air recycling pipeline and pump more than residual liquid, liquid consumption can reduce 50%
    SM-8150 SMT Stencil cleaning machine,PCBA Cleaning Equipment for PCB Assembly      line
    Product Description
     




    Water-based cleaner machine is a water-based cleaning process design  cleaning equipment. Fully automatic finish cleaning- rinsing- drying  process, the main application is stencil, plastic mesh, scraper, the furnace jig cleaning, etc.

    Apply screen size

    Max 740mm(L) ×740mm(W) × 40mm(H)

     

    Cleaning fluid capacity

    50L*2PCS(max)

     

    Best liquid usage

    40L*2PCS

     

    Clean and risn method

    Left-right moving high pressure liquid spray cleaning

     

    Drying method

    High pressure hot air(Optional super models)

     

    Clean time

    2-5 Min

     

    Cleaning fluid separation time

    40S 

     

    Rinse time

    2-5 Min

     

    Rinse times

    1-99times (adjustable)

     

    Drying time

    2-5Min

     

    Cleaning liquid recycling

    1μm (Micro filter: rosin, solder paste, flux and pollutants)

     

    Rinse liquid emission filter

    5μm (Micro filter: rosin, solder paste, flux and pollutants)

     

    Liquid heating temperature

    room temp~60°C

     

    noise

    Less than 50 decibels

     

    Range of resistivity tester

    0~18MΩ

     

    DI water supply

    30~60L/min

     

    DI water pressure

    ≤0.4Mpa

     

    DI water Gateway connecting pipe

    1 Inch

    Air supply

     0.45Mpa ~0.7Mpa

     

    Power supply

    AC380V 50HZ 65A

     

    Total power

    33KW

     

    Net weight

    500Kg

     

    Air out size

    Φ124(W)×30mm(H)

     

    Dimension

    1600mm(L) ×1160mm(W) ×1850mm(H)

     

     








    Product Categories
                                  YUSHUNLI New Design YS-8150N PCB Stencil cleaning machine Metal plastic stencil cleaners
                                  YUSHUNLI New Design YS-8150N PCB Stencil cleaning machine Metal plastic stencil cleaners
                                  YUSHUNLI New Design YS-8150N PCB Stencil cleaning machine Metal plastic stencil cleaners
                                   
                                  Detailed Product Description

                                  Features :
                                  1.Dedicated to water-based cleaning fluid to clean stencils, PCBA, etc. Process with high pressure spray system.
                                   2.Double liquid tank, equipped with heating system, implementation needs cleaning and rinsing.
                                   3.Technological process: cleaning chemical isolation - rinse (open loop/closed loop) - dry
                                   4.Preparation of advanced automatic touch screen operating software, program files stored, used and its simplicity
                                   5.Counting system function, can automatically accumulated cleaning sheet number and loop filter
                                   6.Liquid and the pump pressure can be displayed through the panel pressure gauge, feedback the equipment running status
                                   7.Window cleaning pressure can be adjusted independently, process is more wide, solve the SMT stencil tension in the process of high pressure cleaning problem
                                       
                                  8.Drift lotion resistivity monitoring, ensure the cleanliness, the resistivity can be set up, meet the demand of different halftone technique.
                                       
                                  9.Consumables monitor alarm filter service life
                                  10.Integral stainless steel fuselage, strong and durable, resistant to acid, alkali cleaning fluid, etc  
                                       
                                  11. Floating lotion emissions filtering, more environmental protection
                                       
                                  12.Effect of high pressure fan + hot air drying, drying more quickly and thoroughly
                                       
                                  13. Lower running cost, every time only 12 l liquid cleaning, clean end use compressed air recycling pipeline and pump more than residual liquid, liquid consumption can reduce 50%
                                  SM-8150 SMT Stencil cleaning machine,PCBA Cleaning Equipment for PCB Assembly      line
                                  Product Description
                                   




                                  Water-based cleaner machine is a water-based cleaning process design  cleaning equipment. Fully automatic finish cleaning- rinsing- drying  process, the main application is stencil, plastic mesh, scraper, the furnace jig cleaning, etc.

                                  Apply screen size

                                  Max 740mm(L) ×740mm(W) × 40mm(H)

                                   

                                  Cleaning fluid capacity

                                  50L*2PCS(max)

                                   

                                  Best liquid usage

                                  40L*2PCS

                                   

                                  Clean and risn method

                                  Left-right moving high pressure liquid spray cleaning

                                   

                                  Drying method

                                  High pressure hot air(Optional super models)

                                   

                                  Clean time

                                  2-5 Min

                                   

                                  Cleaning fluid separation time

                                  40S 

                                   

                                  Rinse time

                                  2-5 Min

                                   

                                  Rinse times

                                  1-99times (adjustable)

                                   

                                  Drying time

                                  2-5Min

                                   

                                  Cleaning liquid recycling

                                  1μm (Micro filter: rosin, solder paste, flux and pollutants)

                                   

                                  Rinse liquid emission filter

                                  5μm (Micro filter: rosin, solder paste, flux and pollutants)

                                   

                                  Liquid heating temperature

                                  room temp~60°C

                                   

                                  noise

                                  Less than 50 decibels

                                   

                                  Range of resistivity tester

                                  0~18MΩ

                                   

                                  DI water supply

                                  30~60L/min

                                   

                                  DI water pressure

                                  ≤0.4Mpa

                                   

                                  DI water Gateway connecting pipe

                                  1 Inch

                                  Air supply

                                   0.45Mpa ~0.7Mpa

                                   

                                  Power supply

                                  AC380V 50HZ 65A

                                   

                                  Total power

                                  33KW

                                   

                                  Net weight

                                  500Kg

                                   

                                  Air out size

                                  Φ124(W)×30mm(H)

                                   

                                  Dimension

                                  1600mm(L) ×1160mm(W) ×1850mm(H)

                                   

                                   








                                  Online Message
                                  Welcome message, we will reply within 24 hours!
                                  *Subject:
                                  *Your E-Mail:
                                  (Please make sure your E-mail address is correct.
                                  Else, the receiver cannot reply you afterwards. )

                                  Content:
                                  *Country/Region:
                                  Your Company:
                                  Your Name:
                                  Tel:
                                  Fax:
                                  Related Product
                                  YUSH Electronic Technology Co.,Ltd. Pomeas Optical Technology Copyright 2016
                                  CONTACT US
                                  Website:https://www.pcbcuttingmachine.com
                                  Contacts:Eva Liu +86 13416743702
                                  Tel:+86-512-62751429
                                  Skype:evaliuhuan
                                  Email:sales@yushunli.com evaliu@hk-yush.com
                                  Address: Building H, GuoRui Pioneering Park,
                                  No. 1068 Jinyang East Road, Lujia Town, Kunshan,Suzhou.
                                  Postcode:215331
                                  Dongguan Factory Address: 5th Floor, No.10,
                                  Shanquan Road, Yongtou Village, Chang’an Town,
                                  Dongguan City, Guangdong province, China.
                                  Postcode:523843
                                  YUSH Electronic Technology Co.,Ltd. Pomeas Optical Technology Copyright 2016