Welcome to YUSH Electronic Technology Co.,Ltd.
YUSH Electronic
  English    Chinese
    Automatic PCB Router Machine
    Detailed Product Description
    • PCB size (max) :322mm*322mm
    • Height offset: 60~110mm
    • Weight:550KG

    Automatic PCB Router Machine - YSVC-600

    Specification:

    YSVC-600-

    Host + dust collector weight

    800 KG

    Machine size:

    1075mm×1430mm×1460mm(D×W×H)

    Cutting accuracy:

    ±0.08mm

    Splitting stress value:

    below 300uε

    Dust collector power

    3HP (option 5HP)

    NSK spindle speed:

    Max.60,000rpm

    CCD camera calibration accuracy:

    ±0.01mm

    Dust collection cabinet size:

    640mm×785mm×1760mm(D×W×H)

    X-Y AC Servo speed:

    0-1000mm/sec

    Tool diameter:

    0.8-2.3mm

    X-Y repeatability:

    ±0.02mm

    Unilateral working size:

    290mm X 350mm

    Four-axis servo drive:

    X, Y1, Y2, Z

    Z AC Servo Speed:

    0-800mm/sec

    PCB board cutting thickness:

    0.2mm-6.0mm

    1. Automatic PCB Router Machine adopts High-speed NSK spindle to cut and Depaneling, which greatly reduces the Cutting stress, has high precision, small inertia and fast response. 

    2. Grating safety facilities are installed in the PCB pick-and-place area of the double Y-axis worktable to avoid manual misoperation and meet public safety requirements.

    3.The window operation interface is friendly to switch between Chinese and English, and the window operation interface is shown in the figure. The editing program is simple and can quickly complete the multi-point program.

    4.Multi-layer management authority of software users to prevent misuse and other behaviors.

    5.Automatic PCB Router Machine The vacuuming under the fully adopts a sealed design, and the suction port adopts a 45-degree oblique angle to reduce the eddy current generated by the dust inside.

    6. The upper vacuuming structure (optional) adopts electrostatic brush to seal the cutting point, and independently vacuums the single cutting point, which greatly improves the vacuuming effect.

    7.The milling cutter detection system adopts a photoelectric sensor to monitor the milling cutter status in real time, effectively preventing the phenomenon of continuing operation after the cutter is broken.

    8.The software sets the milling cutter segmentation function, automatically lowers the cutter compensation, prolongs the service life of the milling cutter and reduces the cost.

    Product Categories
                                            Automatic PCB Router Machine
                                            Automatic PCB Router Machine
                                            Automatic PCB Router Machine
                                             
                                            Detailed Product Description
                                            • PCB size (max) :322mm*322mm
                                            • Height offset: 60~110mm
                                            • Weight:550KG

                                            Automatic PCB Router Machine - YSVC-600

                                            Specification:

                                            YSVC-600-

                                            Host + dust collector weight

                                            800 KG

                                            Machine size:

                                            1075mm×1430mm×1460mm(D×W×H)

                                            Cutting accuracy:

                                            ±0.08mm

                                            Splitting stress value:

                                            below 300uε

                                            Dust collector power

                                            3HP (option 5HP)

                                            NSK spindle speed:

                                            Max.60,000rpm

                                            CCD camera calibration accuracy:

                                            ±0.01mm

                                            Dust collection cabinet size:

                                            640mm×785mm×1760mm(D×W×H)

                                            X-Y AC Servo speed:

                                            0-1000mm/sec

                                            Tool diameter:

                                            0.8-2.3mm

                                            X-Y repeatability:

                                            ±0.02mm

                                            Unilateral working size:

                                            290mm X 350mm

                                            Four-axis servo drive:

                                            X, Y1, Y2, Z

                                            Z AC Servo Speed:

                                            0-800mm/sec

                                            PCB board cutting thickness:

                                            0.2mm-6.0mm

                                            1. Automatic PCB Router Machine adopts High-speed NSK spindle to cut and Depaneling, which greatly reduces the Cutting stress, has high precision, small inertia and fast response. 

                                            2. Grating safety facilities are installed in the PCB pick-and-place area of the double Y-axis worktable to avoid manual misoperation and meet public safety requirements.

                                            3.The window operation interface is friendly to switch between Chinese and English, and the window operation interface is shown in the figure. The editing program is simple and can quickly complete the multi-point program.

                                            4.Multi-layer management authority of software users to prevent misuse and other behaviors.

                                            5.Automatic PCB Router Machine The vacuuming under the fully adopts a sealed design, and the suction port adopts a 45-degree oblique angle to reduce the eddy current generated by the dust inside.

                                            6. The upper vacuuming structure (optional) adopts electrostatic brush to seal the cutting point, and independently vacuums the single cutting point, which greatly improves the vacuuming effect.

                                            7.The milling cutter detection system adopts a photoelectric sensor to monitor the milling cutter status in real time, effectively preventing the phenomenon of continuing operation after the cutter is broken.

                                            8.The software sets the milling cutter segmentation function, automatically lowers the cutter compensation, prolongs the service life of the milling cutter and reduces the cost.

                                            Online Message
                                            Welcome message, we will reply within 24 hours!
                                            *Subject:
                                            *Your E-Mail:
                                            (Please make sure your E-mail address is correct.
                                            Else, the receiver cannot reply you afterwards. )

                                            Content:
                                            *Country/Region:
                                            Your Company:
                                            Your Name:
                                            Tel:
                                            Fax:
                                            YUSH Electronic Technology Co.,Ltd. Pomeas Optical Technology Copyright 2016
                                            CONTACT US
                                            Website:https://www.pcbcuttingmachine.com
                                            Contacts:Eva Liu +86 13416743702
                                            Tel:+86-512-62751429
                                            Skype:evaliuhuan
                                            Email:sales@yushunli.com evaliu@hk-yush.com
                                            Address: Building H, GuoRui Pioneering Park,
                                            No. 1068 Jinyang East Road, Lujia Town, Kunshan,Suzhou.
                                            Postcode:215331
                                            Dongguan Factory Address: 5th Floor, No.10,
                                            Shanquan Road, Yongtou Village, Chang’an Town,
                                            Dongguan City, Guangdong province, China.
                                            Postcode:523843
                                            YUSH Electronic Technology Co.,Ltd. Pomeas Optical Technology Copyright 2016