Welcome to YUSH Electronic Technology Co.,Ltd.
YUSH Electronic
  English    Chinese
    Full Automatic solder paste Printer YSL-T3 Plus
    Detailed Product Description

    Features

    1. Auto balance the squeegee pressure which is adjustable

    2.Intelligent 2D detection

    3.Dry and wet cleaning.Option:vacuumcleaning

    4.Option: for thin board printing

    5.Advanced mark point recognition technology and stable system capability

    6.The first online calibration technology in China

     

    Foll Automatic Screen Printer YSL-T3 Plus 0

     

    Overall diagram

    1.Rack module

    2.Lifting module

    3.Platform alignment module

    4.Housing module

    5.Image capture module

    6.Stencil frame positioning module

    7.Squeegee module

    8.Display module

    9.Cleaning module

    10.Conveyor module

    11.Air and power input

     

    Foll Automatic Screen Printer YSL-T3 Plus 1

     

    Technical parameters

     

     

    ParameterYSL-T3 Plus/YSL-T3 BTB/YSL-T3 Plus BTB
    Basic ParametersScreen Frame Size(mm)520(×)×420(Y)-737(×)×737(Y)
    Thickness∶ 20-40mm
    Min PCB(mm)50(×)×50(Y)mm
    Max PCB(mm)400(X)×310(Y)
    Thickness0.2mm~6mm( Use jig when pcb less than 0.4mm)
    Curve<1%(Diagonal measurement)
    PCB backside Part Height10mm
    Conveyor height900±40mm
    SupportMagnetic support,Magnetic piece,Vacuum chamber(Option)
    ClampSide clamp(Standard),please read the option table
    Edge distancePCB process edge ≥2.5mm
    Conveyor speed0~1500mm/s,increment 1mm
    Conveyor beltU type sync belt
    Stopper methodAir cylinder
    Stopper positionSet the PCB stopper position according to the size of board
    Flow directionL-R,R-L,L-L,R-R depends on customer
    Print SystemPrint speed5-200mm/s adjustable
    Print headStep motor drive scraper lifting
    ScraperSteel scraper,rubber scraper(option)
    Scraper angle60°
    Scraper pressure0~20kg
    View SystemSubstrate SeparationThree-section Substrate Separation;Speed∶0.1-20mm/s;Distance∶0-20mm
    Alignment position methodMark Automatic aligning
    CameraGermany BASLER,1/3”CCD,640*480pixel,pixel size 5.6μmx5.6μm
    Acquire image methodUpper/under double photo
    Camera lightCoaxial light,Ring light four kinds light can adjustable
    View range9mm*7mm
    Mark dimensionsDiameter or Side length 1mm~2mm,allowable offset 10%
    Mark shapeCir,Rec,or rhombus etc
    Mark positionPCB dedicated mark or PCB pad
    2D detectionStandard
    AccuracyTable adjusting rangeX=±3mm,Y=±7mm,0=±1.5°
    Positional accuracy±0.01mm
    Printing accuracy±0.025mm
    TimeCycle time<10s(ex print,cleaning time)
    Convert line time<5min
    Programming time<10min
    Control SystemComputer configurationIndustrial PC,Windows official system
    System languageChinese /English
    Pre and next machine connectionSMEMA
    User authorizationUser PW and Senior PW set
    Cleaning SystemCleaning systemDry and Wet(standard),vacuum model(optional)
    Liquid level detectionLiquid level auto alarm detection
    Power ParametersMain power supplyAC220V±10%50/60HZ Single phase
    Total powerAbout 3kw
    Main air supply4.5~6kgf/cm2
    Machine weightAbout 900Kg
    Machine dimensions1140(L)×1380(W)×1530(H)mm(standard);1675(L)mm(Feed feeding module);1675(L)mm(Add connection module),2210(L)mm(Add material and connect module)
    OptionPneumatic top clampFor PCB(thickness≤1mm)
    Top clamp + side clampFor PCB(thickness≤1mm)
    Vacuum adsorption and cleanFor PCB(thickness≤1mm)and FPC
    Auto tin addedAuto tin added
    Auto loading and unloadingAuto loading and unloading
    Flexible and universal supportFor the Double-sided PCB(PCB backside parts Height ≤9mm)
    Automatic positioning of screen frameAutomatic positioning of screen frame
    PCB board thickness movement adjustment functionPCB board thickness is automatically adjusted
    Squeegee pressure feedback functionReal-time feedback of scraper pressure
    Air conditionCustomer can buy by themselves
    The rest of solder paste on the stencil monitoring systemThe rest of solder paste on the stencil monitoring system
    SPI close loopSPI close loop
    UPS power off protectionUPS 15min power off protection
    Industry 4.0Bar code trace function,Production analysis,etc


    Product Categories
                                            Full Automatic solder paste Printer YSL-T3 Plus
                                            Full Automatic solder paste Printer YSL-T3 Plus
                                            Full Automatic solder paste Printer YSL-T3 Plus
                                             
                                            Detailed Product Description

                                            Features

                                            1. Auto balance the squeegee pressure which is adjustable

                                            2.Intelligent 2D detection

                                            3.Dry and wet cleaning.Option:vacuumcleaning

                                            4.Option: for thin board printing

                                            5.Advanced mark point recognition technology and stable system capability

                                            6.The first online calibration technology in China

                                             

                                            Foll Automatic Screen Printer YSL-T3 Plus 0

                                             

                                            Overall diagram

                                            1.Rack module

                                            2.Lifting module

                                            3.Platform alignment module

                                            4.Housing module

                                            5.Image capture module

                                            6.Stencil frame positioning module

                                            7.Squeegee module

                                            8.Display module

                                            9.Cleaning module

                                            10.Conveyor module

                                            11.Air and power input

                                             

                                            Foll Automatic Screen Printer YSL-T3 Plus 1

                                             

                                            Technical parameters

                                             

                                             

                                            ParameterYSL-T3 Plus/YSL-T3 BTB/YSL-T3 Plus BTB
                                            Basic ParametersScreen Frame Size(mm)520(×)×420(Y)-737(×)×737(Y)
                                            Thickness∶ 20-40mm
                                            Min PCB(mm)50(×)×50(Y)mm
                                            Max PCB(mm)400(X)×310(Y)
                                            Thickness0.2mm~6mm( Use jig when pcb less than 0.4mm)
                                            Curve<1%(Diagonal measurement)
                                            PCB backside Part Height10mm
                                            Conveyor height900±40mm
                                            SupportMagnetic support,Magnetic piece,Vacuum chamber(Option)
                                            ClampSide clamp(Standard),please read the option table
                                            Edge distancePCB process edge ≥2.5mm
                                            Conveyor speed0~1500mm/s,increment 1mm
                                            Conveyor beltU type sync belt
                                            Stopper methodAir cylinder
                                            Stopper positionSet the PCB stopper position according to the size of board
                                            Flow directionL-R,R-L,L-L,R-R depends on customer
                                            Print SystemPrint speed5-200mm/s adjustable
                                            Print headStep motor drive scraper lifting
                                            ScraperSteel scraper,rubber scraper(option)
                                            Scraper angle60°
                                            Scraper pressure0~20kg
                                            View SystemSubstrate SeparationThree-section Substrate Separation;Speed∶0.1-20mm/s;Distance∶0-20mm
                                            Alignment position methodMark Automatic aligning
                                            CameraGermany BASLER,1/3”CCD,640*480pixel,pixel size 5.6μmx5.6μm
                                            Acquire image methodUpper/under double photo
                                            Camera lightCoaxial light,Ring light four kinds light can adjustable
                                            View range9mm*7mm
                                            Mark dimensionsDiameter or Side length 1mm~2mm,allowable offset 10%
                                            Mark shapeCir,Rec,or rhombus etc
                                            Mark positionPCB dedicated mark or PCB pad
                                            2D detectionStandard
                                            AccuracyTable adjusting rangeX=±3mm,Y=±7mm,0=±1.5°
                                            Positional accuracy±0.01mm
                                            Printing accuracy±0.025mm
                                            TimeCycle time<10s(ex print,cleaning time)
                                            Convert line time<5min
                                            Programming time<10min
                                            Control SystemComputer configurationIndustrial PC,Windows official system
                                            System languageChinese /English
                                            Pre and next machine connectionSMEMA
                                            User authorizationUser PW and Senior PW set
                                            Cleaning SystemCleaning systemDry and Wet(standard),vacuum model(optional)
                                            Liquid level detectionLiquid level auto alarm detection
                                            Power ParametersMain power supplyAC220V±10%50/60HZ Single phase
                                            Total powerAbout 3kw
                                            Main air supply4.5~6kgf/cm2
                                            Machine weightAbout 900Kg
                                            Machine dimensions1140(L)×1380(W)×1530(H)mm(standard);1675(L)mm(Feed feeding module);1675(L)mm(Add connection module),2210(L)mm(Add material and connect module)
                                            OptionPneumatic top clampFor PCB(thickness≤1mm)
                                            Top clamp + side clampFor PCB(thickness≤1mm)
                                            Vacuum adsorption and cleanFor PCB(thickness≤1mm)and FPC
                                            Auto tin addedAuto tin added
                                            Auto loading and unloadingAuto loading and unloading
                                            Flexible and universal supportFor the Double-sided PCB(PCB backside parts Height ≤9mm)
                                            Automatic positioning of screen frameAutomatic positioning of screen frame
                                            PCB board thickness movement adjustment functionPCB board thickness is automatically adjusted
                                            Squeegee pressure feedback functionReal-time feedback of scraper pressure
                                            Air conditionCustomer can buy by themselves
                                            The rest of solder paste on the stencil monitoring systemThe rest of solder paste on the stencil monitoring system
                                            SPI close loopSPI close loop
                                            UPS power off protectionUPS 15min power off protection
                                            Industry 4.0Bar code trace function,Production analysis,etc


                                            Online Message
                                            Welcome message, we will reply within 24 hours!
                                            *Subject:
                                            *Your E-Mail:
                                            (Please make sure your E-mail address is correct.
                                            Else, the receiver cannot reply you afterwards. )

                                            Content:
                                            *Country/Region:
                                            Your Company:
                                            Your Name:
                                            Tel:
                                            Fax:
                                            YUSH Electronic Technology Co.,Ltd. Pomeas Optical Technology Copyright 2016
                                            CONTACT US
                                            Website:https://www.pcbcuttingmachine.com
                                            Contacts:Eva Liu +86 13416743702
                                            Tel:+86-512-62751429
                                            Skype:evaliuhuan
                                            Email:sales@yushunli.com evaliu@hk-yush.com
                                            Address: Building H, GuoRui Pioneering Park,
                                            No. 1068 Jinyang East Road, Lujia Town, Kunshan,Suzhou.
                                            Postcode:215331
                                            Dongguan Factory Address: 5th Floor, No.10,
                                            Shanquan Road, Yongtou Village, Chang’an Town,
                                            Dongguan City, Guangdong province, China.
                                            Postcode:523843
                                            YUSH Electronic Technology Co.,Ltd. Pomeas Optical Technology Copyright 2016