Multi - layer circuit board cutting machine information

Industry Questions

Multi - layer circuit board cutting machine information

Automatic PCB Router Machine - YSVC-600

Specification:

<span style="font-size:15.0pt;font-family:"color:black;">YSVC-600-
Host + dust collector weight	800 KG
Machine size:	1075mm×1430mm×1460mm(D×W×H)
Cutting accuracy:	±0.08mm
Splitting stress value:	below 300uε
Dust collector power	3HP (option 5HP)
NSK spindle speed:	Max.60,000rpm
CCD camera calibration accuracy:	±0.01mm
Dust collection cabinet size:	640mm×785mm×1760mm(D×W×H)
X-Y AC Servo speed:	0-1000mm/sec
Tool diameter:	0.8-2.3mm
X-Y repeatability:	±0.02mm
Unilateral working size:	290mm X 350mm
Four-axis servo drive:	X, Y1, Y2, Z
Z AC Servo Speed:	0-800mm/sec
PCB board cutting thickness:	0.2mm-6.0mm

1. Automatic PCB Router Machine adopts High-speed NSK spindle to cut and Depaneling, which greatly reduces the Cutting stress, has high precision, small inertia and fast response.

2. Grating safety facilities are installed in the PCB pick-and-place area of the double Y-axis worktable to avoid manual misoperation and meet public safety requirements.

3.The window operation interface is friendly to switch between Chinese and English, and the window operation interface is shown in the figure. The editing program is simple and can quickly complete the multi-point program.

4.Multi-layer management authority of software users to prevent misuse and other behaviors.

5.Automatic PCB Router Machine The vacuuming under the fully adopts a sealed design, and the suction port adopts a 45-degree oblique angle to reduce the eddy current generated by the dust inside.

6. The upper vacuuming structure (optional) adopts electrostatic brush to seal the cutting point, and independently vacuums the single cutting point, which greatly improves the vacuuming effect.

7.The milling cutter detection system adopts a photoelectric sensor to monitor the milling cutter status in real time, effectively preventing the phenomenon of continuing operation after the cutter is broken.

8.The software sets the milling cutter segmentation function, automatically lowers the cutter compensation, prolongs the service life of the milling cutter and reduces the cost.

Product Categories

Location: Home -> Industry Questions

Multi - layer circuit board cutting machine information

Automatic PCB Router Machine - YSVC-600

Specification:

<span style="font-size:15.0pt;font-family:"color:black;">YSVC-600-
Host + dust collector weight	800 KG
Machine size:	1075mm×1430mm×1460mm(D×W×H)
Cutting accuracy:	±0.08mm
Splitting stress value:	below 300uε
Dust collector power	3HP (option 5HP)
NSK spindle speed:	Max.60,000rpm
CCD camera calibration accuracy:	±0.01mm
Dust collection cabinet size:	640mm×785mm×1760mm(D×W×H)
X-Y AC Servo speed:	0-1000mm/sec
Tool diameter:	0.8-2.3mm
X-Y repeatability:	±0.02mm
Unilateral working size:	290mm X 350mm
Four-axis servo drive:	X, Y1, Y2, Z
Z AC Servo Speed:	0-800mm/sec
PCB board cutting thickness:	0.2mm-6.0mm

1. Automatic PCB Router Machine adopts High-speed NSK spindle to cut and Depaneling, which greatly reduces the Cutting stress, has high precision, small inertia and fast response.

2. Grating safety facilities are installed in the PCB pick-and-place area of the double Y-axis worktable to avoid manual misoperation and meet public safety requirements.

4.Multi-layer management authority of software users to prevent misuse and other behaviors.

5.Automatic PCB Router Machine The vacuuming under the fully adopts a sealed design, and the suction port adopts a 45-degree oblique angle to reduce the eddy current generated by the dust inside.

6. The upper vacuuming structure (optional) adopts electrostatic brush to seal the cutting point, and independently vacuums the single cutting point, which greatly improves the vacuuming effect.

8.The software sets the milling cutter segmentation function, automatically lowers the cutter compensation, prolongs the service life of the milling cutter and reduces the cost.

[Back]