Welcome to YUSH Electronic Technology Co.,Ltd.
YUSH Electronic
  English    Chinese
Reflow Oven
U Series reflow oven

U Series reflow oven 0

 

Technical requirements:

1.The customer to install control valve to control the import and export of the exhaust volume up to 145; 

2.Each up to 145 entrance hole exhaust volume control in 15-20M³/min;

3.The main power supply: 3 380V diameter AC five wire, the main power line diameter of more than 35mm².

U Series reflow oven 1

 

U Series reflow oven 2

 

U Series Product Features

1.High heat energy, low energy consumption, high power motor matching wind wheel,theoretical and practical verification; under the same conditions set, can ensure the small and large components to achieve the minimum heat absorption difference,and achieve the best thermal balance;

2.The latest thermal insulation technology and the new furnace structure design can effectively reduce the furnace surface temperature and reduce the heat loss;

3.Imported PLC program controller, stable and reliable performance, high precision of temperature control and curve repetition;

4.Double-sided guide rail with special hardening treatment, strong and durable, repeatable use, cost saving up to 50%;

5.Online maintenance of rosin recycling system, modular design,convenient maintenance, reduce maintenance time;

6.Patented hot air system, hot air convection conduction more efficient, faster heat compensation;

7.Built-in real-time monitoring system of furnace temperature, which can automatically generate furnace temperature curve (option);

8.Intelligent data can be traced and uploaded to MES system.

 

U Series reflow oven 3

 

Heating module design is easy for maintenance and cleaning.Front and rear re-flow design could insulate the heating effect between heating zones in order to achieve the accuracy temperature and longer life-time of hot-air-flow motors. Also by the frequent control of motors,the speed of air flow could be adjusted.

 

U Series reflow oven 4

 

Manual+electric width adjustment structure design,equipped with emergency manual transmission structure in case of preventing PCB burned when power off.

 

U Series reflow oven 5

 

Special adjustable width and transmission design can ensure stable and reliable PCB transmission by anti-jammed chain.

 

U Series reflow oven 6

 

High stability control system,powerful function.

 

Technical parameters

 

 

U series reflow oven main specifications
Model NOYSL-808AU/YSL-808NUYSL-810AU/YSL-810NUYSL-812AU/YSL-812NU
Heating system
Heating Zone8 heating zones,16 heating modules10 heating zones,20 heating modules12 heating zones,24 heating modules
Heating Length2950mm3670mm4390mm
Cooling TypeThree cooling zones:forced air cooling/water cooling
Outlet Exhaust Diameter valume2-0145,Exhaust demand 15-20m³/min x2
Conveyor System
Product Widthmin50mm-max400mm
Conveying DirectionL→R,R→L
Inlet Height900±20mm
Fixed Rail SideFront rail Fixed(Option∶Rear Rail Fixed)
Conveyor TypeChain+mesh with synchronous conveying
Cmponent Height+30mm;-25mm/Clearance above 30mm,Clearance below 25mm
conveying speed300mm-2000mm/min
control system
Power SupplyAC30 5W 380V 50/60HZ
Total Power57KW71KW89KW
Start Up Power30KW35KW40KW
Running Power7.5KW9.5KW11.5KW
Temperature Range-320℃/Room temperature 320℃
Control typePC+PLC Control system
Rail Width Adjusting ModeElectric+Manual
Temp Control accuracy±1℃
PCB Temp Deviation±1℃
Data storageProcess Data and status record
Power Outage ProtectionEquipped with UPS
operation InterfaceWindows Chinese simplified,English online free switching
General
Dimension(LxWxH)5580*1450*1620mm6300x1450x1620mm7020x1450x1620mm
Weight2300-2500kg2700-2900kg3100-3300kg
ColorBright wrinkled white

 

 

U Series reflow oven 7


Product Categories
                                                        Location: Home -> Products -> Reflow Oven

                                                        U Series reflow oven


                                                        U Series reflow oven 0

                                                         

                                                        Technical requirements:

                                                        1.The customer to install control valve to control the import and export of the exhaust volume up to 145; 

                                                        2.Each up to 145 entrance hole exhaust volume control in 15-20M³/min;

                                                        3.The main power supply: 3 380V diameter AC five wire, the main power line diameter of more than 35mm².

                                                        U Series reflow oven 1

                                                         

                                                        U Series reflow oven 2

                                                         

                                                        U Series Product Features

                                                        1.High heat energy, low energy consumption, high power motor matching wind wheel,theoretical and practical verification; under the same conditions set, can ensure the small and large components to achieve the minimum heat absorption difference,and achieve the best thermal balance;

                                                        2.The latest thermal insulation technology and the new furnace structure design can effectively reduce the furnace surface temperature and reduce the heat loss;

                                                        3.Imported PLC program controller, stable and reliable performance, high precision of temperature control and curve repetition;

                                                        4.Double-sided guide rail with special hardening treatment, strong and durable, repeatable use, cost saving up to 50%;

                                                        5.Online maintenance of rosin recycling system, modular design,convenient maintenance, reduce maintenance time;

                                                        6.Patented hot air system, hot air convection conduction more efficient, faster heat compensation;

                                                        7.Built-in real-time monitoring system of furnace temperature, which can automatically generate furnace temperature curve (option);

                                                        8.Intelligent data can be traced and uploaded to MES system.

                                                         

                                                        U Series reflow oven 3

                                                         

                                                        Heating module design is easy for maintenance and cleaning.Front and rear re-flow design could insulate the heating effect between heating zones in order to achieve the accuracy temperature and longer life-time of hot-air-flow motors. Also by the frequent control of motors,the speed of air flow could be adjusted.

                                                         

                                                        U Series reflow oven 4

                                                         

                                                        Manual+electric width adjustment structure design,equipped with emergency manual transmission structure in case of preventing PCB burned when power off.

                                                         

                                                        U Series reflow oven 5

                                                         

                                                        Special adjustable width and transmission design can ensure stable and reliable PCB transmission by anti-jammed chain.

                                                         

                                                        U Series reflow oven 6

                                                         

                                                        High stability control system,powerful function.

                                                         

                                                        Technical parameters

                                                         

                                                         

                                                        U series reflow oven main specifications
                                                        Model NOYSL-808AU/YSL-808NUYSL-810AU/YSL-810NUYSL-812AU/YSL-812NU
                                                        Heating system
                                                        Heating Zone8 heating zones,16 heating modules10 heating zones,20 heating modules12 heating zones,24 heating modules
                                                        Heating Length2950mm3670mm4390mm
                                                        Cooling TypeThree cooling zones:forced air cooling/water cooling
                                                        Outlet Exhaust Diameter valume2-0145,Exhaust demand 15-20m³/min x2
                                                        Conveyor System
                                                        Product Widthmin50mm-max400mm
                                                        Conveying DirectionL→R,R→L
                                                        Inlet Height900±20mm
                                                        Fixed Rail SideFront rail Fixed(Option∶Rear Rail Fixed)
                                                        Conveyor TypeChain+mesh with synchronous conveying
                                                        Cmponent Height+30mm;-25mm/Clearance above 30mm,Clearance below 25mm
                                                        conveying speed300mm-2000mm/min
                                                        control system
                                                        Power SupplyAC30 5W 380V 50/60HZ
                                                        Total Power57KW71KW89KW
                                                        Start Up Power30KW35KW40KW
                                                        Running Power7.5KW9.5KW11.5KW
                                                        Temperature Range-320℃/Room temperature 320℃
                                                        Control typePC+PLC Control system
                                                        Rail Width Adjusting ModeElectric+Manual
                                                        Temp Control accuracy±1℃
                                                        PCB Temp Deviation±1℃
                                                        Data storageProcess Data and status record
                                                        Power Outage ProtectionEquipped with UPS
                                                        operation InterfaceWindows Chinese simplified,English online free switching
                                                        General
                                                        Dimension(LxWxH)5580*1450*1620mm6300x1450x1620mm7020x1450x1620mm
                                                        Weight2300-2500kg2700-2900kg3100-3300kg
                                                        ColorBright wrinkled white

                                                         

                                                         

                                                        U Series reflow oven 7


                                                        YUSH Electronic Technology Co.,Ltd. Pomeas Optical Technology Copyright 2016
                                                        CONTACT US

                                                        Website:https://www.pcbcuttingmachine.com
                                                        Contacts:Eva Liu +8613450659407 +8613416743702
                                                        Tel:+86-512-62751429
                                                        Skype:evaliuhuan
                                                        Email:caojun@hk-yush.com  sales@yushunli.com evaliu@hk-yush.com
                                                        Address: Building H, GuoRui Pioneering Park,
                                                        No. 1068 Jinyang East Road, Lujia Town, Kunshan,Suzhou.
                                                        Postcode:215331
                                                        Dongguan Factory Address: 5th Floor, No.10,
                                                        Shanquan Road, Yongtou Village, Chang’an Town,
                                                        Dongguan City, Guangdong province, China.
                                                        Postcode:523843

                                                        YUSH Electronic Technology Co.,Ltd. Pomeas Optical Technology Copyright 2016