What is -pcb-post stamp hole-cutting machine

Pcb stamp hole cutting machine machine specifications:

Machine weight: 580kg
Working accuracy: ±0.05mm

Working noise: ≤60dB

Working stroke: ≥60mm

Stroke speed: 8 ~ 15s adjustable (excluding board picking time)
Use voltage : 220VAC

Board area: 330×220mm
Working pressure: 0.50-0.70Mpa dry air source

Punching force: 3T 8T 10T
Cylinder return mold opening force: 1.5T 4T 5T
Machine size: 820 × 740 × 1750mm

Pcb stamp hole cutting machine features:

1. pcb stamp hole cutting machine is a die punching type dividing machine.

2, the equipment is compact, the fuselage is solid, the cylinder 125,160,200 cylinder diameter Taiwan Yadeke.

3. The equipment runs smoothly, with low vibration and low noise.

4, Chinese touch screen display, the panel is clear, the Chinese alarm function is displayed, and the abnormal alarm is clear at a glance.

5. The equipment is versatile. A variety of molds can be replaced, and the mold change is convenient and quick.

6, pcb stamp hole cutting machine safety:

7. Double-switched two-hand action starts.

8. The equipment is equipped with the lower mold in and out of the slideway, the lower mold automatically enters and exits, and the product is convenient and safe to pick and place.

9. Set the emergency stop switch and find the problem and stop it in time.

10. Set the safety door to avoid the mistake of hand when installing and debugging the mold. (No safety door does not work during normal operation)

11. Set the safety door to the shooting device, put the wrong board on the mold, the injection device can sense the error, the mold can not enter.

12. Safety air pressure setting function, over limit alarm. Automatic counting, over-limit shutdown.

13. Reduce the internal stress generated when cutting the board and avoid tin cracking

14. Punching semi-finished PCB, FPC high efficiency, the world's top 500 designated product suppliers.